Electrical combined instrument:

<<<back
Electrical combined instrument

Application:
The instrument is suitable for indicating the fuel level, cooling fluid temperature, lubricating oil pressure and battery condition in buses, tractors and dumpers. The measuring instrument contains 4 pcs signalling lamps covered with red light passing plastic plate. Their connection is optional. In the measuring instrument the 5 pcs movements can be changed independently from each other.

Description:
The measuring instrument and the transmitters form a set. The measuring instrument consists of 5 pcs cross-coil, moving magnet movements built into an internal illumination metal case coated against corrosion. The belonging transmitters bring about on the basis of their characteristics current change in the instruments and the pointers deflect. The deflection of the pointers can be read off on the scales in kPa, V, °C and the level at the values of 0 - 1/2 - 4/4.
 
Technical data:
Operating voltage: 12 or 24 V
Resistance of the sender: See gauges!
Basic error in the percentual value of the scale lenght: See gauges!
Additional error: ±1% / 10°C
Vibration proofness: +5 dB on frequency range 25 -1000 Hz
( 0dB = g = 9.81 m/s2 )
Protection grade against the penetration of dust and splashing water:
front side: IP 54
other side: IP 40
electrical connection: IP 00
Temperature limits:
Operiting temperature: - 25°C ... +65°C
Storage temperature: - 40°C ... +70°C
Mounting size: D140 mm
Mass: 0.75 kg
<<<back
 

New products:

  • 2012

    SMGC: STEPPR MOTOR +
    GRAHIC 6” TFT + CAN
  • 2012

    SMMC: STEPPER MOTOR
    + MONO-GRAPHIC 4” LCD + CAN
  • 2011

    SMSC: STEPPER MOTOR
    + SEGMENT LCD + CAN