Temperature senders:

<<<back  
types:
 
 
Pressure switches - common ground

Application:
The switch is suitable for switching a signalling lamp at a preset value of lubricating oil pressure or compressed air pressure of motor vehicles.

Description:
The pressure switch is of spring-contact type. It is built into a metal trunk. The medium to be measured is separeted by an elastic membrane from switching unit. The compression spring moves upon effect increasing pressure and opens or closes a contact pair. Between the given pressure ranges any switching value – according to the order – can be adjusted.

Technical data:
Adjustable switching value: 50 - 700 kPa
Pressing tight: 1000 kPa, max. 2 sec.
Switch point C/F = Contact close as pressure falls
C/R = Contact close as pressure rises
O/F = Contact open as pressure falls
O/R = Contact open as pressure rises
Permissible max. load: 5 W, non – inductive
Voltage: 6 – 24 V
Hysteresis: 40 kPa
Vibration proofness: +10 dB on frequency range 25 -1000 Hz
( 0dB = g = 9.81 m/s2 )
Protection: dust and waterproof: IP 65
electrical connection: IP 00
Temperature limits: Operiting temperature: 0°C ... +100°C
Storage temperature: -40°C .. + 80 °C
Mass: 0.05 kg


KMGY Nr. Thread Switching pressure /bar/ Switch
38001327011 M12X1.5 0.5 ±0.3 O/R
38001327012 3/8T 0.5 ±0.3 O/R
38001327013 M10X1 0.5 ±0.3 O/R
38001327014 M12X1.5 0.4 ±0.3 O/R
38001327016 M14X1.5 0.4 ±0.3 O/R
38001327018 M10X1T 0.9 ±0.3 O/R
38001327019 M12X1.5 7.0 ±0.3 O/R
38001327020 M10X1T 0.4 ±0.3 O/R
38001327021 M10X1 0.5 ±0.3 O/R
38001327022 1/8-27NPTF 0.7 ±0.3 O/R
38001327023 1/8-27NPTF 0.5 ±0.3 O/R
38001327024 M12X1.5 6.0 ±0.5 O/R
38001327025 M12X1.5 6.5 ±0.3 O/R
38001327026 M12X1.5 0.5 ±0.3 O/R
38001327027 M12X1.5 0.6 ±0.3 O/R
38001327028 M12X1.5 0.8 ±0.3 O/R
38001327029 M12X1.5 1.0 ±0.3 O/R
38001327030 M12X1.5 1.5 ±0.3 O/R
38001327031 M12X1.5 2.0 ±0.3 O/R
38001327032 M12X1.5 2.5 ±0.3 O/R
38001327033 M12X1.5 4.5 ±0.3 O/R
38001327034 M12X1.5 5.0 ±0.3 O/R
38001327035 M12X1.5 5.5 ±0.3 O/R
38001327036 M14X1.5 0.5 ±0.3 O/R
38001327037 M12X1.5 5.8 ±0.3 O/R
38001327038 M14X1.5 0.7 ±0.3 O/R
38001327040 M10X1 0.3 ±0.3 O/R
38001327041 M10X1 1.5 ±0.3 O/R
38001327042 M12X1.5 1.5 ±0.3 O/R
38001327053 M10X1T 0.6 ±0.3 O/R
38001327055 1/8-27BRIGGS 1.3 ±0.3 O/R
38001327056 1/8-27BRIGGS 4.0 ±0.3 O/R
38001327057 M10X1 3.0 ±0.3 O/R
38001327058 M12X1.5 0.6 ±0.15 O/R
38001327059 M12X1.5 0.8 ±0.15 O/R
38001327060 M12X1.5 1.0 ±0.15 O/R
38001327061 M12X1.5 3.7 ±0.3 O/R
38001327063 M14X1.5 1.9 ±0.3 O/R
38001327064 M14X1.5 0.8 ±0.3 O/R
38001327065 G1/8 0.9 ±0.3 O/R


 
 
Pressure switches - isulated ground

Application:
The switch is suitable for switching a signalling lamp at a preset value of lubricating oil pressure or compressed air pressure of motor vehicles.

Description:
The pressure switch is of spring-contact type. It is built into a metal trunk. The medium to be measured is separeted by an elastic membrane from switching unit. The compression spring moves upon effect increasing pressure and opens or closes a contact pair. Between the given pressure ranges any switching value – according to the order – can be adjusted.

Technical data
Adjustable switching value: 50 - 700 kPa
Pressing tight: 1000 kPa, max. 2 sec.
Switch point C/F = Contact close as pressure falls
C/R = Contact close as pressure rises
O/F = Contact open as pressure falls
O/R = Contact open as pressure rises
Permissible max. load: 5 W, non – inductive
Voltage: 6 – 24 V
Hysteresis: 40 kPa
Vibration proofness: +10 dB on frequency range 25 -1000 Hz
( 0dB = g = 9.81 m/s2 )
Protection: dust and waterproof: IP 65
electrical connection: IP 00
Temperature limits: Operiting temperature: 0°C ... +100°C
Storage temperature: -40°C .. + 80 °C
Mass: 0.05 kg
KMGY Nr. Thread Switching pressure /bar/ Switch
38028827001 G1/8 2.0–3.0±0.3 O/R
38028827002 G1/8 5.0–6.0±0.3 O/R
<<<back

New products:

  • 2012

    SMGC: STEPPR MOTOR +
    GRAHIC 6” TFT + CAN
  • 2012

    SMMC: STEPPER MOTOR
    + MONO-GRAPHIC 4” LCD + CAN
  • 2011

    SMSC: STEPPER MOTOR
    + SEGMENT LCD + CAN